急需一下标准： 我邮箱为
shenghai.ustb@gmail.com
多谢！！！
ASTM G30-1997(2003)
制作和使用U形弯曲应力腐蚀试样 Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
ASTM G38-2001(2007)
C-环形应力腐蚀试样的制作和使用的标准实施规程 Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
ASTM G39-1999(2005)
曲梁应力腐蚀试样制备和使用的标准实施规程 Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
ASTM F945-2006
航空发动机清洗材料对钛合金的应力腐蚀标准试验方法 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
ASTM G103-1997(2005)
在6%沸腾的氯化钠溶液中进行铝锌镁低铜合金的应力腐蚀断裂试验的标准实施规程 Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution
ASTM G123-2000(2005)
沸腾酸化氯化钠溶液中不同镍合量不锈钢合金应力腐蚀裂纹评定的标准试验方法 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
ASTM G139-2005 用破坏载荷法测定可热处理铝合金制品的抗应力腐蚀开裂特性的标准试验方法 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
ASTM G168-2000(2006)
裂缝前双束应力腐蚀样品的制作和使用标准实施规范 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
ASTM G35-1998(2004)
不锈钢及有关镍铬铁合金在连多硫酸中应力腐蚀断裂灵敏性测定的标准实施规程 Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
ASTM G36-1994(2006)
评定在沸腾的氯化镁溶液中金属及其合金的抗应力腐蚀断裂 Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution
ASTM G47-1998(2004)
测定高强度铝合金制品应力腐蚀断裂敏感性的标准试验方法 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
ASTM G49-1985(2005)
直接拉伸应力腐蚀试样的制备和使用 Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM G64-1999(2005)
热处理铝合金抗应力腐蚀断裂性的标准分类 Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
ASTM G44-1999(2005)
在3.5%氯化钠中性溶液中用交替浸渍法的金属及合金暴露的标准实施规程 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution
ASTM G129-2000(2006)
金属材料对环境协助开裂敏感性评价用慢应变率试验的标准实施规范 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking
我邮箱为
shenghai.ustb@gmail.com
多谢！！！
本帖转载自书桌网
http://www.huoyi.net/本贴地址：
http://www.huoyi.net/thread-12569-1-1.html
- -